Home  |  Update Listing  |  BBC Boards

To have your NORRISCRAFT added to this list, click on Add a Boat
fill in the form and hit "Submit".   Your boat will be added asap.

** To add a photo(s) to your listing, e-mail me a .jpg file.
 Updated 8/2/10

NORRIS CRAFT

  E-Mail Links
88 NorrisCraft
   2100 XL Vee
91 150 Johnson		 26 Raker, Humminbird electronics, Johnson TM. 63 mph @ 5600 rpm (speedo).  Danielha - TN
99 NorrisCraft
     2000 XLVD
07 225 Merc 
            Optimax		 27 Tempest, 10" Bass Jack hydraulic, Lowrance/Eagle electronics, Motorguide TM.  Propshaft is 1.5 above the pad. 73 mph @ 5900 rpm (gps). "Would like to get a little more out of it, I know it will do it, I just need a little help."  Mitch - NC
79 NorrisCraft
89 130 Yamaha		 22 Laser II, 6" jackplate, Humminbird Wide Optic, Humminbird 383C, Johnson 54# TM. "I've had this boat for almost a month now LOVE it. It's only a 16 footer but it's so comfortable behind the wheel and on the deck fishin. The tri hull is awesome look-wise and runs thru the water like no other 16 footer I've been on. The color scheme on this rig is awesome, Silver flake on bottom to a flat Black, Red pinstripes and Silver flake on top and inside. I love this boat. If I were to buy another boat it would definitely have to be another Craft, at least a 19 ft."  WV bassman - WV
88 NorrisCraft 24" prop, 6" jackplate. "Just got the boat yesterday   JD - KY
     19 XL VEE (10/15/09) and on the water today. Feels like a strong  
88 150 Evinrude running boat mid 60's right now. Has hot foot, pro trim and  
            XP some cheap electronics. Any help with setups on this boat  
  will be great."  
97 NorrisCraft 25" Tempest, 12" hydraulic jackplate, Lowrance LCX27c,  XLDVee - GA
     2000 XLD Vee Motorguide 82#. 82 mph (gps).  
95 225 Merc     
            Pro Max    
87 NorrisCraft 96 mph (gps).  Josh R - TN
87 220+ Merc    PHOTO
85 NorrisCraft 23" prop, MinnKota 24V 55# TM. 68 mph @ 5800 rpm  Robert L - VA
85 150 Yamaha (gps).  
97 NorrisCraft 26" Triton1 Custom Henrick, manual jackplate, Eagle  Fish2win - TN
     1900 electronics, Motorguide. 82 mph @ 6300 rpm (gps).  
97 200 Yamaha    
95 NorrisCraft 25" Trophy, 12" jackplate, Lowrance X85, Garmin 240,  Fishook23 - KY
98 200 Merc EFI Motorguide Brute 67#. 68 mph @ 5800 rpm (gps).  PHOTO
  "Gotta love those Norriscraft colors! Mac and the boys know  
  how to build a boat!"  
95 NorrisCraft 26" Chopper, 12" Norriscraft jackplate, Garmin electronics,  Norriscraft Pro - KY
    1900 XL Vee Motorguide TM.  
95 225 Merc    
     Pro Max    
86 NorrisCraft Motorguide 12/24 V 55#. "Purchased boat in March, needs  JimL - GA
     1900 XLV rewiring, soft spots in floor, nothing major. Needs electronics  
87 175 Johnson replaced."  
  Updated 5/21/09...... "New carpet, floors repaired, new electronics & rewired."  
80 NorrisCraft Humminbird Wide View, Lowrance depth finder w/water   BrianM - WVA
80 150 Evinrude temp, Motorguide Brute 756 67#.  67 mph @ 5500 rpm  
  (speedo). "Awesome boat, handles like a dream. Can stay on  
  plane clear down to 21 mph."  
88 NorrisCraft 24" Trophy Plus, 12" Rapid Jack, Eagle electronics,  XLV 2100 - TN
     XLV2100 Motorguide Tournament Series. Propshaft is 1/2" below pad.  
88 200+ Merc 71.1 mph @ 6200 rpm (gps). "I have ran Chopper props  
  but lose too much speed when loaded for tournaments.  
  The 24" Trophy Plus has been a great compromise for   
  fishing and speed.  Only lose 2 miles per hour loaded with  
  fuel and livewell. Will stay on plane at 22 miles per hour for  
  rough water or night fishing. Norriscraft boats and Mercury  
  outboards, it doesn't get any better than this."  
77 NorrisCraft 28" Chopper, 6" CMC hydraulic, Garmin 240, MinnKota 65  Rock-n-Roy - OH
Super Pro Medalist 12/24 V TM. 83 mph @ 6300 rpm (gps).  
86 200 Merc "This is a blast from the past, this old tri hull screams. It's  
  funny to watch people look at you while they point, look at   
  the old boat move, or they are pointing at a 100' rooster tail  
  as you go by. I'm in the middle of a 2.4 Bridgeport deal that  
  spins 8500 rpms. The lower unit is a 2 to 1 ratio low water  
  pickup. All you guys out there trying to get your engine height  
  set just right good luck, each time you go out the water  
  conditions change. Trust me, go with a hydraulic jackplate,  
  you can plane easier and run bigger props.  
  I run all Choppers big and small ear, 26", 28" 30". I run 83  
  mph with two guys and gear, by myself it runs 88 mph.  
  With the Bridgeport maybe 100 mph, "hold on".   
  P.S. Anybody with EFI for Bridgeports please email me."  
63 NorrisCraft "Trying to restore this Nostalgic vessel to its former glory!!!  William - TN
58 35 Johnson Would love to see pics of other classic NorrisCrafts."  
     Super Seahorse    
90 NorrisCraft 27" OMC SRX, 10" jackplate, Lowrance X65 (2),   Gary - TN
     2100 XLV Evinrude 12/24 V TM. Propshaft is 1" above the pad.  
     200+ Merc 83 mph @ 6300 rpm (gps). "Runs good until livewell is full  
  of water. Any suggestions on how to lose some weight?   
  The boat drops to 70 mph with full livewell."  
84 NorrisCraft 28" Merc Chopper II, 6" Reb jackplate, Lowrance X50,   Mike - GA
00 200 Merc carb OMC BF 45 TM. Propshaft is 1" above the pad.   
  71 mph @ 6000 rpm (gps). "This boat has been a nightmare  
  to setup. This combo should be way faster than 71 mph.   
  I was thinking it should see speeds in the upper 70's to 80   
  mph. I have tried many combos of props and engine heights.  
  The boat runs fastest with the propshaft even with or below  
  the pad??  I have a Bob's low water pick-up. Any ideas for  
  more speed?"  
85 NorrisCraft 24" Raker, 6" jackplate, Humminbird 200DX trolling motor  L.C. - KY
     1750 XLVee mount, Standard communication high speed depth finder,   
    150 Evinrude Minnkota Maxxum 74#. Motor is 4" off the transom.  
    XP VRO 50 mph @ 4800/4900 rpm (gps).  
  "Bought bot used from a close friend, restored boat with new  
  factory custom seats and custom carpet.  All new Gaffrig  
  gauges with white faces and red flat bezel inserts. Added  
  Pro-Tech deck sheet under front deck carpet for extra  
  cushion for those long hours of fishing.  Replaced surface   
  temp gauge with new Humminbird unit. Replaced steering  
  wheel with GT Grant 15" custom racing wheel and put  
  ProTrim tilt/trim switches on steering mount.  All new switches  
  and wiring throughout.  New livewell control timer, new  
  trolling motor.  Added interior lights in all compartments and  
  added gas shock lifters for rear comp.lids. Added new  
  decals and emblems to show off how Norris Craft boats   
  look and last.  Looks Great!!  Red metalflake/ Silver flake,  
  one half black and red ruby carpet with Clipper Red/Silver  
  Black & Saddle upholstery for the seats.  One pro bass seat  
  on pro pole (front), one pro pole (rear). Also a hot foot for  
  total control of the wheel. All this on a custom classic  
  deluxe drive on trailer. What a great rig!! "  
60? NorrisCraft "This isn't a bassboat, but somebody may be interested in   Molahman - TN
'57 35 Johnson what they used to make."  
           Javelin    
98 NorrisCraft 29" OMC SS TRX, 12" jackplate.  89 mph @ 7500 rpm.  Roy - GA
     2000 XLD (gps).  
     280 Merc    
98 NorrisCraft 24" Trophy, 12" Detwiler hydraulic, Lowrance LCG-2400,   Dan - TN
   2000 FXLD Vee MotorGuide 767. "I really like this boat.  It handles and rides  PHOTO
   200 Merc EFI great! Those bucket seats are really comfortable."  
00 NorrisCraft 29" Spinelli, dealer option jackplate. Propshaft is 1.5" above SanadaRacing - Japan
     225 Merc the pad. 84.2 mph @ 6600 rpm (gps). "Hi, I import  
            ProMax NorrisCraft, Triton & Legend boats to various Japanese  
  dealers. The test was done by Seiji Marine who was the first  
  to purchase NorrisCraft in Japan.  The speed was recorded  
  on one of those handy Garmin GPS's, on a very crispy  
  nice sunny winter day of 12/24/99. The temp was about 45F  
  taking about right amount of oxygen into the EFI !"  
96 NorrisCraft 25" Trophy, 6" Detwiler hydraulic, Lowrance X70's (2),  Keith - MI
     2000 XLDV MotorGuide 765 Competition. 84 mph @ 5800 rpm (gps).  
     225 Merc "This boat was Mac Jr's '96 demo and was setup by them.  
  They used this boat to mate with the Merc 3 Litre 225 and   
  had very good results.  It has a Bob's Machine Shop low  
  water pickup with a Detwiler HydroJack and setback plate  
  with a total setback of 12". They had to custom make a  
  stainless extension for the anti-cavitation plate which gives a   
  good holeshot.  Although not the fastest setup compared to  
  lighter motors, this rig really performs well and gets   
  surprisingly good mileage.  The Crumley's know how to   
  build 'em!!"  
91 NorrisCraft 23" Trophy, 6" Reb jackplate, Garmin 240, Humminbird  Bassman 1750 - MD
     1750 XLV Platinum ID, MotorGuide 300. Motor is 4 1/2" off the   
     150 Mariner transom. 5700 rpms. Not sure about top speed, used to   
            Mag 3 have transducer with speedo indicated 74 mph with a 24"   
  Turbo prop. Switched to a 23" Trophy, raised motor and   
  boat got real loose, fun to drive !!  
89 NorrisCraft 12" jackplate, 2 Eagle Ultra III's, Magellan GPS,   Ncraft150 - OH
     1900 XLVee MotorGuide TM.  63 mph @ 5400 rpm (gps). "I've looked  
     150 Merc at hundreds of bass boats. After having this boat I will only  
  look to Norris Craft to custom design my future bass boat."  
77 NorrisCraft 25" Protester, 6" jackplate, Lowrance LMS 350a, Mercury  Terry - TN
     17' Tri Hull Thruster TM. Motor is 4" off transom.  74 mph @ 6000 rpm.  
     200 Merc (speedo). "I love this boat, but it takes nerves of steel to   
  drive her. The low water pickup really tuned this old blast  
  in."  
98 NorrisCraft     25" Trophy, 12" jackplate, 2 Lowrance X85's, MotorGuide Ronnie Pettit - GA  
     2000 XLD Brute 62# TM, and a touch of custom decal work.   
     200 Merc EFI  "Plan to add solid mounts,tuner, Bob's nosecone and     
  extend jackplate to 14". Plan to get a true radared 80 mph."  

Copyright © 2000-2009 BassBoat Central Inc.  All rights reserved.